Hardline Hour Meter Wireless For Motorcycles

iMETER Wireless Hour Meter™ by Hardline Products®

The most advanced, accurate, reliable hour meter made — and the easiest to install!
No connections required, just peel and stick!
Automatically starts and stops from the running of your engine by sensing the resonance (vibration) of the engine. Only records when the engine is running. Will not record when you trailer your bike.
Works on any motorcycle, ATV/UTV, or automatically. 2- or 4-stroke.

What’s the one aftermarket part that every four-stroke rider should invest in?

“An hour meter, plain and simple. Four-strokes live and die by how much time you put on them.”
— Mitch Payton, Pro-Circuit® interview in Motocross Action Magazine

• No wiring required. No power, ground, or pick-up wire needed — just peel and stick.

• Includes resettable trip meter as well as total hours accumulated mode.

• Includes double-sided tape and mounting screws.

• Waterproof and shock-resistant; meets an IP-68 rating.

• Built-in battery has 8-year lifespan.

• Includes log book to record service life (oil changes, valve adjustments, spark plugs, settings, etc.)

• Records & displays up to 9,999.9 hours.

• Hourglass symbol automatically appears when engine is running and flashes to indicate time is being counted.

• Display screen can be read with engine on or off.

• Erasable trip meter.

• Resolution: 0.1 = 6 minutes

• Unit measures 2 1/8" length × 1 1/2" wide × 5/8" high.

• Designed, assembled, and tested in the USA. Made with global and domestic parts.

• One-year limited warranty.

• Made with RoHS-compliant components.

• CE certified

• Patented

• UPC: 632194723467

See FAQs for additional information.
Do not use this meter with Steering Stem Mount HRMM-2. Use mounts HRMM-3, HRMM-4, or HRMM-5.

Made with solid-state electronics and a modern LCD, the iMETER has superb environmental durability and enhanced functionality, making it the best choice of all possibilities — without sacrificing performance, operation, or budget.

Note: Meter display has factory 5-digit code (OFF.5) displayed until you enable (turn on) the meter. This action is only required once. Push and hold the button for 6 seconds until the code clears. The display will show 0.0. Your meter is now ready for operation.